---
-
  name: simple-number-set
  tag: mi
  match: "string-length(text())=1 and translate(text(), 'ℂℕℚℝℤ', '')=''"  # tricky way to match any of the letters instead of using 'or'
  replace:
  - intent:
      name: number-sets
      children: [x: "text()"]

-
  name: sup-number-set
  tag: msup
  match:
  - "*[1][string-length(text())=1 and translate(., 'ℂℕℚℝℤ', '')=''] and" 
  - "*[2][string-length(text())=1 and (.='+' or .='-' or self::m:mn)]" 
  replace:
  - intent:
      name: number-sets
      children:
      - x: "*[1]"
      - x: "*[2]"

-
  name: real-part
  tag: mi
  match: "(.='Re' or .='re' or .='ℜ') and following-sibling::*[1][.='\u2061']" # before function apply
  replace:
  - intent:
      name: real-part
      children: []
  
-
  name: imaginary-part
  tag: mi
  match: "(.='Im' or .='im' or .='ℑ') and following-sibling::*[1][.='\u2061']" # before function apply
  replace: 
  - intent:
      name: imaginary-part
      children: []
  
-
  name: roman_numeral
  tag: [mi, mn, mtext]
  match: "@data-number"
  replace: 
  - intent:
      name: mn
      children: [x: "@data-number"]

-
  name: positive-or-negative
  tag: mrow
  match: "count(*)=2 and *[1][self::m:mo][.='+' or .='-']"
  variables:
  - AtLeftEdge: "EdgeNode(., 'left', 'mtd')"
  - AtLeftEdgeOfMTD: "name($AtLeftEdge) = 'mtd'"
  - ContinuedColumn: "$TableProperty='lines' or $TableProperty='system-of-equations' or $TableProperty='piecewise'"
  - InContinuedRow: "parent::m:mtd[parent::m:mtr[@data-intent-property[contains(., ':continued-row:')]]]"
  - FirstColumn: "$AtLeftEdge/../*[1]=$AtLeftEdge"   # first child of mtr...
  replace:
  - test:
      # don't use positive/negative if a continued data cell
      if: "$AtLeftEdgeOfMTD and $ContinuedColumn and (not($FirstColumn) or $InContinuedRow)"
      then:
      - intent:
          xpath-name: "IfThenElse(*[1][self::m:mo][.='+'], 'plus', 'minus')"
          attrs: "data-intent-property='concat(data-intent-property, \":infix:\")'"
          children: [x: "*[2]"]
      else:
      - intent:
          xpath-name: "IfThenElse(*[1][self::m:mo][.='+'], 'plus', 'minus')"
          attrs: "data-intent-property='concat(data-intent-property, \":prefix:\")'"
          children: [x: "*[2]"]
               

-
  # (a,b) has many interpretations; (a, b] (etc) have fewer interpretations.
  # as an interval, it represents a set and hence a clue that it is an interval is that a set operator comes
  #   before or after it. '=' is also common.
  # They also commonly stand by themselves, but so does the interpretation as a point or gcd, so we don't include (xxx, yyy) in the inference
  # Note [x,y] is also a commutator.
  # Intervals are never contained in other intervals, so rule them out if there is an ancestor that could be an interval
  name: interval
  tag: mrow
  match: 
    - "count(*)=3 and "
       # FIX: consider adding ]...[ versions
    - "(*[1][.='(' or .='['] and *[3][.=')' or .=']']) and"   # match bracketing
    - "(*[2][count(*)=3 and *[2][.=',']]) and"                               # inside should have ','
    # intervals are not part of set notation (e.g, { (x,y)∈L | ...}) nor are they nested
    - "not(ancestor::*[IsBracketed(., '{', '}') or IsBracketed(., '[', ']') or IsBracketed(., '(', ')')]) and "  
    - "not(descendant::*[IsBracketed(., '{', '}') or IsBracketed(., '[', ']') or IsBracketed(., '(', ')')]) and "  
      # FIX: if both the first and third children of *[2] are mn, then make sure first <= third
    - "("
    - "  not(IsBracketed(., '(', ')')) or "                                                                   # (.,.) is very ambiguous -- need more clues
    - "  $ClearSpeak_Paren = 'Interval' or "                                                                  # pref is set
    - " *[2]/*[1][contains(., '∞')] or "                                                                      # starts with infinity
    - " *[2]/*[3][contains(., '∞')] or "                                                                      # ends with infinity
    - "  preceding-sibling::*[1][self::m:mo and ( .='=' or IsInDefinition(., 'SubsetOperators') )] or "  # context hint
    - "  following-sibling::*[1][self::m:mo and ( .='=' or IsInDefinition(., 'SubsetOperators') )]"      # context hint
    - ")"
  replace:
  - test:
    - if: "*[1][.='('] and *[3][.=')']"
      then:
      - intent:
          name: "open-interval"
          children: [x: "*[2]/*[1]", x: "*[2]/*[3]"]
    - else_if: "*[1][.='('] and *[3][.=']']"
      then:
      - intent:
          name: "open-closed-interval"
          children: [x: "*[2]/*[1]", x: "*[2]/*[3]"]
    - else_if: "*[1][.='['] and *[3][.=']']"
      then:
      - intent:
          name: "closed-interval"
          children: [x: "*[2]/*[1]", x: "*[2]/*[3]"]
      else:
      - intent:
          name: "closed-open-interval"
          children: [x: "*[2]/*[1]", x: "*[2]/*[3]"]

-
  name: binomial-frac
  tag: mrow
  # "translate()" is used because it might be "0em" and we need to get rid of the "em"
  match: "IsBracketed(., '(', ')') and *[2][self::m:mfrac][translate(@linethickness, 'abcdefghijklmnopqrstuvwxyz', '')=0]"
  replace:
  - intent:
      name: binomial
      attrs: "data-intent-property='concat(data-intent-property, \":infix:\")'"
      children:
      - x: "*[2]/*[1]"
      - x: "*[2]/*[2]"

-
  # C with pre-subscript 'n' and post-subscript 'm'. The 'n' can be either in the sub or super position
  # See https://en.wikipedia.org/wiki/Binomial_coefficient#History_and_notation
  name: binomial-mmultiscripts
  tag: mmultiscripts
  variables:
  - Prescripts: "m:mprescripts/following-sibling::*"
  - Postscripts: "m:mprescripts/preceding-sibling::*[position() < last()]"
  match: 
  - "*[1][self::m:mi and .='C'] and"
  - "count($Prescripts)=2 and ($Prescripts[1][self::m:none] or $Prescripts[2][self::m:none]) and "
  - "count($Postscripts)=2 and $Postscripts[2][self::m:none]"
  replace:
  - intent:
      name: binomial
      attrs: "data-intent-property='concat(data-intent-property, \":infix:\")'"
      children:
      - x: "IfThenElse(name($Prescripts[2])='none', $Prescripts[1], $Prescripts[2])"
      - x: "$Postscripts[1]"


-
  name: binomial-msub   # C_{n,k}
  tag: msub
  match:
  - "*[1][self::m:mi and .='C'] and"
  - "*[2][self::m:mrow and count(*)=3 and *[2][.=',']]"
  replace:
  - intent:
      name: binomial
      attrs: "data-intent-property='concat(data-intent-property, \":infix:\")'"
      children:
      - x: "*[2]/*[1]"
      - x: "*[2]/*[3]"

-
  # P with pre-sub or superscript 'n' and post-subscript 'k' (https://en.wikipedia.org/wiki/Permutation#k-permutations_of_n)
  name: permutation-mmultiscripts
  tag: mmultiscripts
  variables:
  - Prescripts: "m:mprescripts/following-sibling::*"
  - Postscripts: "m:mprescripts/preceding-sibling::*[position() < last()]"
  match: 
  - "*[1][self::m:mi and .='P'] and"
  - "count($Prescripts)=2 and ($Prescripts[1][self::m:none] or $Prescripts[2][self::m:none]) and "
  - "count($Postscripts)=2 and $Postscripts[2][self::m:none]"
  replace:
  - intent:
      name: pochhammer
      attrs: "data-intent-property='concat(data-intent-property, \":infix:\")'"
      children:
      - test:
          if: "$Prescripts[1][self::m:none]"
          then: [x: "$Prescripts[2]"]
          else: [x: "$Prescripts[1]"]
      - x: "$Postscripts[1]"

-
  # P with superscript 'n' and subscript 'k' (https://en.wikipedia.org/wiki/Permutation#k-permutations_of_n)
  name: permutation-msubsup
  tag: msubsup
  match: 
  - "*[1][self::m:mi and .='P']"
  replace:
  - intent:
      name: pochhammer
      attrs: "data-intent-property='concat(data-intent-property, \":infix:\")'"
      children:
      - x: "*[3]"
      - x: "*[2]"

# rules on scripted vertical bars ('evaluated at')
-
  name: evaluated-at-msub
  tag: mrow
  match: "count(*)=2 and *[2][self::m:msub and *[1][self::m:mo][.='|']]"
  replace:
  - intent:
      name: "evaluate"
      attrs: "data-intent-property='concat(data-intent-property, \":infix:\")'"
      children:
      - x: "*[1]"
      - x: "*[2]/*[2]"

-
  name: evaluated-at-msubsup
  tag: mrow
  match: "count(*)=2 and *[2][self::m:msubsup and *[1][self::m:mo][.='|']]"
  replace: 
  - intent:
      name: "evaluate"
      children:
      - x: "*[1]"
      - x: "*[2]/*[2]"
      - x: "*[2]/*[3]"

# it is also used outside of brackets
-
  name: bracketed-evaluated-at
  tag: msubsup
  match: "IsBracketed(*[1], '[', ']')"
  replace: 
  - intent:
      name: "evaluate"
      children:
      - x: "*[1]/*[1]"
      - x: "*[2]"
      - x: "*[3]"


-
  # vertical bars otherwise
  # could also be cardinality, length, ...
  name: absolute-value
  tag: mrow
  match: "count(*) = 3 and not(*[2][self::m:mtable]) and IsBracketed(., '|', '|')"
  replace:
  - intent:
      name: "absolute-value"
      attrs: "data-intent-property='concat(data-intent-property, \":function:\")'"
      children: [x: "*[2]"]

-
  name: default
  tag: msqrt
  match: "."
  replace:
  - intent:
      name: "square-root"
      attrs: "data-intent-property='concat(data-intent-property, \":function:\")'"
      children: [x: "*[1]"]


-
  name: sqrt
  tag: mroot
  match: "*[2][self::m:mn and .='2']"
  replace:
  - intent:
      name: "square-root"
      attrs: "data-intent-property='concat(data-intent-property, \":function:\")'"
      children: [x: "*[1]"]

-
  name: default
  tag: mroot
  match: "."
  replace:
  - intent:
      name: "root"
      children:
      - x: "*[1]"
      - x: "*[2]"

  
- # handle log with a base
  name: log-with-base
  tag: [msub, msubsup]
  match: "*[1][self::m:mi and .='log']"
  replace:
  - test:
      if: "self::m:msub"
      then:
      - intent:
          name: "logarithm-with-base"
          attrs: "data-intent-property='concat(data-intent-property, \":prefix\")'"
          children: [x: "*[2]"]    # grab the base
      else:
      - intent:
          name: "power"
          attrs: "data-intent-property='concat(data-intent-property, \":infix:\")'"
          children:
          - intent:
              name: "logarithm-with-base"
              attrs: "data-intent-property='concat(data-intent-property, \":prefix:\")'"
              children: [x: "*[2]"]  # grab the base
          - x: "*[3]"       # grab the exponent

-
  name: bigop
  tag: [msub, munder]
  match: "IsInDefinition(*[1], 'LargeOperators') or contains(@data-intent-property, ':largeop:')"
  replace: 
  - intent:
      name: "large-op"    # Fix: the name in the spreadsheet needs updating/fixing
      children:
      - x: "*[1]"
      - x: "*[2]"
-
  name: limit
  tag: [msub, munder]
  variables: [NoSpacesBase: "translate(*[1], ' \u00A0\u2004\u2005\u2006\u2007\u2008\u2009\u200A','')"]   # Sometimes these have (weird) spaces in them
  match: "*[1][$NoSpacesBase='lim' or $NoSpacesBase='limsup' or $NoSpacesBase='liminf']"
  replace: 
  - intent:
      xpath-name: "IfThenElse($NoSpacesBase='lim', 'limit', IfThenElse($NoSpacesBase='limsup', 'limit-sup', 'limit-inf'))"
      attrs: "data-intent-property='concat(data-intent-property, \":prefix:\")'"
      children: [x: "*[2]"]

- name: repeating-decimal
  tag: mrow
  match: "count(*)=3 and *[1][self::m:mn] and 
          *[2][.='\u2062'] and
          *[3][self::m:mover][*[1][self::m:mn] and *[2][.='\u00AF']]"
  replace:
  - intent:
      name: "repeating-decimal"
      children:
      - x: "*[1]"
      - x: "*[3]/*[1]"

-
  name: modified-var
  tag: mover
  # breve, check, dot, double-dot, triple-dot, quadruple-dot, grave, hat, tilde, line/bar
  match: "*[1][self::m:mi] and *[2][translate(., '\u0306\u030c.\u00A8\u02D9\u20DB\u20DC`^~¯_', '')='']"
  replace:
  - intent:
      name: "modified-variable"
      attrs: "data-intent-property='concat(data-intent-property, \":silent:\")'"
      children:
      - x: "*[1]"
      - x: "*[2]"

-
  name: vector
  tag: mover
  match: "*[1][self::m:mi] and *[2][.='→' or .='⇀']"
  replace:
  - intent:
      name: "vector"
      attrs: "data-intent-property='concat(data-intent-property, \":prefix:\")'"
      children:
      - x: "*[1]"


-
   # this captures the output for the mhchem's "<=>", "<<=>", and "<=>>" output (there are no Unicode arrows for them)
   # this isn't a perfect match, but should be good enough and allows merging all three (see github.com/NSoiffer/MathCAT/issues/60)
   name: chemistry-mhchem-equilibrium-arrow
   tag: mover
   match:
   -    "*[1][substring(., 1, 1)='↽'] and"
   -    "*[2][substring(., string-length(), 1)='⇀']"
   replace:
   - intent:
      name: "chemical-arrow-operator"
      children:
      - test:
          if: "*[1][self::m:mrow]"
          then_test:
              if: "*[2][self::m:mrow]"
              then: [t: "\u1f8d2"]    # this is currently unassigned and may get used by UTC at some point (<=>)
              else: [t: "\u1f8d4"]    # this is currently unassigned and may get used by UTC at some point (<<=>)
          else: [t: "\u1f8d3"]        # this is currently unassigned and may get used by UTC at some point (<==>>)

-
  # need to include the name of the element so the rules know whether to say "sub" or "super"
  name: chemistry
  tag: [msub, msup]
  match: "@data-chem-formula"
  replace:
  - intent:
      name: "chemical-formula"
      children:       # have to list individual children because "*" results in an internal error (children aren't flat)
      - x: "name(.)"
      - x: "*[1]"
      - x: "*[2]"


-
  name: chemistry-prescripts
  tag: mmultiscripts
  match: "@data-chem-formula"
  replace:
  - test:
      - if: "count(*)=4 or count(*)=6"
        then:
        - intent:
            name: "chemical-nuclide"
            children:
            - x: "*"
        else:       # FIX: what other cases are there???
        - intent:
            name: "chemical-formula"
            children:       
            - x: "*"


-
  name: chemical-element
  tag: [mi, mtext]
  match: "@data-chem-element"
  replace:
  - intent:
      name: "chemical-element"
      children:
      - x: "text()"

-
  name: unit
  tag: [mi, mtext]
  match: "@class='MathML-unit' or contains(@data-intent-property, ':unit')"
  replace:
  - intent:
      name: "unit"
      attrs: "data-intent-property='\":unit:\"'"   # the value ":unit:" needs to be an xpath string, hence the escaped quotes
      children:
      - x: "text()"

- # this is attempt to catch units when some has created a non-italic word that matches a unit
  # other mtext unit cases were caught above.
  # This has a guard to make sure it is positionally a unit.
  #   Currently only checking for a simple mrow like "3 s or 3/4 km"
  #   Other checks would be an mfrac with a unit in both parts (complicated to check) or msup with a unit in the base and that inside an mrow
  name: mtext-inference-unit
  tag: [mtext, mi]
  match: "not(@data-chem-element) and
          (self::m:mtext or string-length(.) > 1 or @mathvariant='normal') and
          (parent::*[1][self::m:mrow and count(*)=3 and *[2][.='\u2062'] and
                        *[1][self::m:mn or (self::m:mfrac and *[1][self::m:mn] and *[2][self::m:mn])]]) and
          count(preceding-sibling::*) = 2 and 
          (DefinitionValue(., 'Speech', 'SIUnits') != '' or
           DefinitionValue(., 'Speech', 'UnitsWithoutPrefixes') != '' or 
           DefinitionValue(., 'Speech', 'EnglishUnits') != '' or
           (string-length(.) >= 3 and
            substring(., 1, 2) = 'da' and 
            DefinitionValue(substring(., 3), 'Speech', 'SIUnits') != '') or
           (string-length(.) >= 2 and
            DefinitionValue(substring(., 1, 1), 'Speech', 'SIPrefixes') != '' and
            DefinitionValue(substring(., 2), 'Speech', 'SIUnits') != ''))"
  replace:
  - intent:
      name: "unit"
      attrs: "data-intent-property='\":unit:\"'"   # the value ":unit:" needs to be an xpath string, hence the escaped quotes
      children:
      - x: "text()"

-
  name: chemical-formula-op
  tag: [mo]
  match: "@data-chem-formula-op"
  replace:
  - intent:
      name: "chemical-formula-operator"
      children:
      - x: "text()"

-
  name: chemical-arrow-op
  tag: [mo]
  # FIX: this is a duplicate of the list in chemistry.rs. Probably should pull out and add to definitions.yaml
  match: "@data-chem-equation-op and translate(., '→➔←⟶⟵⤻⇋⇌↿↾⇃⇂⥮⥯⇷⇸⤉⤈⥂⥄', '')=''"
  replace:
  - intent:
      name: "chemical-arrow-operator"
      children:
      - x: "text()"

-
  name: chemical-equation-op
  tag: [mo]
  match: "@data-chem-equation-op"
  replace:
  - intent:
      name: "chemical-equation-operator"
      children:
      - x: "text()"

-
  name: chemistry-concentration
  tag: mrow
  match: "ancestor-or-self::*[@data-chem-equation] and IsBracketed(., '[', ']')"
  replace:
  - intent:
      name: "chemistry-concentration"
      attrs: "data-intent-property='concat(data-intent-property, \":function:\")'"
      children:
      - x: "*[2]"

-
  name: chemistry-state
  tag: mrow
  match:
    - "(@data-chem-formula or @data-chem-equation) and"
    - "IsBracketed(., '(', ')') and"
    - "*[2][.='s' or .='l' or .='g' or .='aq']"
  replace:
  - intent:
      name: "chemical-state"
      children:
      - x: "*[2]"


# This needs to be before the simple "x prime" rule
# minutes/seconds or feet/inches
# If ' or " follows a number, then it is not "prime", but is a unit
# Note the ASCII ' and " are converted to prime during canonicalization if in a superscript
# Handles single, double, primes, and also double quote, which don't have to be in an msup
# The rules are:
# 1. If the prime follows a degree sign with a number (in various forms) or letter after it,
#    then it is minutes/seconds
# 2. Else, if it follows a *number* (in various forms), then it feet/inches
# 3. Else it is 'prime'
# any ? ( count(match)==2 &&
#           (name(match)=="mrow" || name(match)=="msup") &&
#           (MatchString($1, "mo", "'") || MatchString($1, "mo", "′") ||      // apostrophe or prime
#            MatchString($1, "mo", "″") || MatchString($1, "mo", "\"")) &&    // double quote or double prime
#           (
#               // '1': degree sign check
#               ( has_previous(match) &&
#                  ( (MatchString($1, "mo", "′") &&
#                      ( name(previous(match))=="msup" ||
#                         (name(previous(match))=="mrow" && count(previous(match))==2)) &&
#                     MatchString(previous(match)[1], "mo", "°")) ||
#                      ( has_previous(previous(match)) &&
#                         (MatchString($1, "mo", "″") || MatchString($1, "mo", "\"")) &&
#                         ( name(previous(match, 2))=="msup" ||
#                           (name(previous(match, 2))=="mrow" && count(previous(match, 2))==2)) &&
#                         MatchString(previous(match, 2)[1], "mo", "°"))
#                   )
#               ) || 
# 
#              // '2': number or numeric fraction in front
#              name($0)=="mn" ||
#               (name($0)=="mfrac" && name($0[0])=="mn" && name($0[1])=="mn")
#           )
#         )
#   => structure(
#         $0,
#        UIWord([$1[0],$1[-1]])
#                 {ruleRef="RR_unitsBase";
#                  singular=MatchString($0, "mn", "1");
#                  // if this follows a degree sign, then it is an angle notation (min/secs) regardless of the pref setting
#                  // we have to either look at the previous entry for mins or the one prior to that for secs
#                  pref= ( has_previous(match) &&
#                            ( (MatchString($1, "mo", "′") &&
#                               ( name(previous(match))=="msup" ||
#                                  (name(previous(match))=="mrow" && count(previous(match))==2)) &&
#                                MatchString(previous(match)[1], "mo", "°")) ||
#                               ( has_previous(previous(match)) &&
#                                   (MatchString($1, "mo", "″") || MatchString($1, "mo", "\"")) &&
#                                 ( name(previous(match, 2))=="msup" ||
#                                    (name(previous(match, 2))=="mrow" && count(previous(match, 2))==2)) &&
#                                  MatchString(previous(match, 2)[1], "mo", "°"))
#                             )
#                          ) ? "Angle" : "Length";
#                 }
#         );

# Pseudo-script characters are characters such as "degree sign" ('°') that are raised but in MathML should be in a superscript.
# They are not spoken as if in a superscript (e.g "x degrees", not "x superscripts degrees")
-
  name: skip-super
  tag: [msup, msubsup]
  match: "*[last()][translate(., '′″‴⁗\"†‡°*', '')='' or .=\"'\"]"  # you can't have both ' and " in an xpath string
  replace:
  - intent:
      name: "skip-super"
      attrs: "data-intent-property='concat(data-intent-property, \":silent:\")'"
      children: [x: "*"]

-
  name: mo-super
  tag: [msup, msubsup]
  match: "*[last()][self::m:mo]"
  replace:
  - intent:
      name: "say-super"
      attrs: "data-intent-property='concat(data-intent-property, \":infix:\")'"
      children: [x: "*"]

# rules for functions raised to a power
# these could have been written on 'mrow' but putting them on msup seems more specific
# to see if it is a function, we look right to see if the following sibling is apply-function
-
  name: function-inverse
  tag: msup
  match:
  - "*[2][self::m:mrow][count(*)=2] and"                        # exponent is an mrow with children...
  - "*[2]/*[1][self::m:mo][.='-'] and"                     #   '-'
  - "*[2]/*[2][self::m:mn][.=1] and"                       #  and '1'
  - "*[1][self::m:mi] and IsInDefinition(*[1], 'TrigFunctionNames') and"        # base is a trig function name (e.g, sin, sinh)
  - "following-sibling::*[1][self::m:mo][.='\u2061']"      # and msup is followed by invisible function apply
  replace:
  - intent:
      name: "inverse-function"
      children:
      - x: "*[1]"


-
  name: bigop
  tag: [msubsup, munderover]
  match: "IsInDefinition(*[1], 'LargeOperators') or contains(@data-intent-property, ':largeop:')"
  replace: 
  - intent:
      name: "large-op"    # Fix: the name in the spreadsheet needs updating/fixing
      children:
      - x: "*[1]"
      - x: "*[2]"
      - x: "*[3]"

- 
  name: set
  tag: mrow
  # sets have { }s and should have at least one of ",∈∉|" (vertical bar is "such that") or be the empty set
  match: "IsBracketed(., '{', '}') and
          (count(*)=2 or (count(*)=3 and IsNode(*[2], 'leaf')) or . != translate(., ',∈∉|:', ''))"
  replace: 
  - intent:
      name: "set"
      children:
      - test:
          if: count(*) = 2
          then: []
          else: [x: "*[2]"]
-
  name: default
  tag: msub
  match: "."
  replace:
  - intent:
      name: "indexed-by"
      attrs: "data-intent-property='concat(data-intent-property, \":infix:\")'"
      children:
      - x: "*[1]"
      - x: "*[2]"

-
  # this adds a :unit property to the fraction if its children are units -- simplifies things downstream
  # we have to this is the attr calculation because at that point, the children have been replaced so they will be marked as units if there are units
  # at the point of 'match', the replacement has yet to be done so they may not have inferred units.
  # this catches s^2 as in m/s^2
  name: default
  tag: msup
  match: "."
  replace:
  - intent:
      name: "power"
      attrs: "data-intent-property='IfThenElse(*[1][contains(@data-intent-property, \":unit:\")], \":unit:\", \"\")'"
      children:
      - x: "*[1]"
      - x: "*[2]"


-
  name: default
  tag: msubsup
  match: "."
  replace: 
  - intent:
      name: "power"
      children:
      - intent:
          name: "indexed-by"
          attrs: "data-intent-property='concat(data-intent-property, \":infix:\")'"
          children:
            - x: "*[1]"
            - x: "*[2]"
      - x: "*[3]"

-
  # this adds a :unit property to the fraction if its children are units -- simplifies things downstream
  # we have to this is the attr calculation because at that point, the children have been replaced so they will be marked as units if there are units
  # at the point of 'match', the replacement has yet to be done so they may not have inferred units.
  name: default
  tag: mfrac
  match: "."
  replace:
  - intent:
      name: "fraction"
      attrs: "data-intent-property='IfThenElse(*[1][contains(@data-intent-property, \":unit:\")] and
                                               DEBUG(*[2])[contains(@data-intent-property, \":unit:\")],
                                               \":unit:\",
                                               \"\")'"
      children:
      - x: "*[1]"
      - x: "*[2]"


# generic mtable: treat as multiline equations of some sort
# if a property is set, handle that first

-
  name: mtable-property-is-set
  tag: mtable
  # any 'intent' property set overrides the inferred property
  variables: [TableProperty: "IfThenElse(contains(@data-intent-property, ':array:'), 'array',
                               IfThenElse(contains(@data-intent-property, ':matrix:'), 'matrix',
                               IfThenElse(contains(@data-intent-property, ':determinant:'), 'determinant',
                               IfThenElse(contains(@data-intent-property, ':piecewise:'), 'piecewise',
                               IfThenElse(contains(@data-intent-property, ':system-of-equations:'), 'system-of-equations',
                               IfThenElse(contains(@data-intent-property, ':lines:'), 'lines',
                                 $TableProperty))))))"]   # '' is what to say if none match"
  match: "$TableProperty !=''"
  replace:
  - intent:
      xpath-name: "$TableProperty"
      children:
      - x: "*"

-
  name: "piecewise"
  tag: mrow
  match: "count(*)=2 and *[1][.='{'] and
          *[2][self::m:mtable and not(
                        contains(@data-intent-property, ':array:') or
                        contains(@data-intent-property, ':matrix:') or
                        contains(@data-intent-property, ':determinant:') or
                        contains(@data-intent-property, 'system-of-equations:') or
                        contains(@data-intent-property, ':lines:') )
              ]"
  replace:
  - with:
      variables: [TableProperty: "'piecewise'"]
      replace: [x: "*[2]"]

-
  name: matrix
  tag: mrow
  match:
  - "count(*)=3 and (IsBracketed(., '(', ')') or IsBracketed(., '[', ']')) and
          *[2][self::m:mtable and not(
                        contains(@data-intent-property, ':piecewise:') or
                        contains(@data-intent-property, ':matrix:') or
                        contains(@data-intent-property, ':determinant:') or
                        contains(@data-intent-property, 'system-of-equations:') or
                        contains(@data-intent-property, ':lines:') )
              ]"
  replace:
  - with:
      variables: [TableProperty: "'matrix'"]
      replace: [x: "*[2]"]

-
  name: determinant
  tag: mrow
  match:
  - "count(*)=3 and IsBracketed(., '|', '|') and
          *[2][self::m:mtable and not(
                        contains(@data-intent-property, ':array:') or
                        contains(@data-intent-property, ':matrix:') or
                        contains(@data-intent-property, ':piecewise:') or
                        contains(@data-intent-property, 'system-of-equations:') or
                        contains(@data-intent-property, ':lines:') )
              ]"
  replace:
  - with:
      variables: [TableProperty: "'determinant'"]
      replace: [x: "*[2]"]

-
  name: mtable-equations-property
  tag: mtable
  match: "count(*) > 0 and *[1][contains(translate(., '=≠<>≤≥≦≧', '='), '=')]"
  replace:
  - with:
      variables:
      - TableProperty: "'system-of-equations'"
      replace:
      - intent:
          name: "system-of-equations"
          children:
          - x: "*"

-
  name: mtable-lines-property
  tag: mtable
  match: "count(*) > 0 and not(descendant::*[self::m:mo and not(.='-' or .='+')])"
  replace:
  - with:
      variables:
      - TableProperty: "'lines'"
      replace:
      - intent:
          name: "lines"
          children:
          - x: "*"

-
  # merge all the mtd into a single mtd
  name: consolidate-labeled-mtd-entries
  tag: [mlabeledtr, mtr]
  # Note: child hasn't been processed, so 'intent' hasn't been processed/turned into data-intent-property
  match: "count(*) > 1 and
          ($TableProperty = 'piecewise' or $TableProperty = 'system-of-equations' or $TableProperty = 'lines') and
          (self::m:mlabeledtr or *[contains(@intent, ':equation-label')])"
  replace:
  - intent:
      name: "mlabeledtr"
      children:
      - x: "*[contains(@intent, ':equation-label')]"
      - intent:
          name: "mtd"
          attrs: "id=*[not(contains(@intent, ':equation-label'))][1]/*[1]/@id"
          children: 
          - intent:
              name: "mrow"
              attrs: "id=*[not(contains(@intent, ':equation-label'))][1]/*[1]/@id"
              children: [x: "*[not(contains(@intent, ':equation-label'))]"]

-
  # convert a mtr to a mlabeledtr
  name: mlabeledtr
  tag: mtr
  # Note: child hasn't been processed, so 'intent' hasn't been processed/turned into data-intent-property
  match: "count(*) > 1 and *[contains(@intent, ':equation-label')]"
  replace:
  - intent:
      name: "mlabeledtr"
      children:
      - x: "*[contains(@intent, ':equation-label')]"
      - x: "*[not(contains(@intent, ':equation-label'))]"

-
  # merge all the mtd into a single mtd
  name: consolidate-mtd-entries
  tag: mtr
  match: "count(*) > 1 and
          ($TableProperty = 'piecewise' or $TableProperty = 'system-of-equations' or $TableProperty = 'lines')"
  replace:
  - intent:
      name: "mtr"
      attrs: "id='@id'"
      children:
      - intent:
          name: "mtd"
          attrs: "id='*[1]/@id'"
          children: 
          - intent:
              name: "mrow"
              attrs: "id='*[2]/@id'"
              children: [x: "*"]

-
  # We need to preserve any intent properties that are on the mtd (e.g., :pause)
  # Note: at this point "intent" has been processed so we look at @data-intent-property
  name: mtd-to-mrow
  tag: mtd
  match: "($TableProperty = 'piecewise' or $TableProperty = 'system-of-equations' or $TableProperty = 'lines') and
          not(contains(@data-intent-property, ':equation-label'))"
  replace:
  - test:
      if: "@data-intent-property"
      then:
      - intent:
          name: "mrow"
          attrs: "id=@id data-intent-property=@data-intent-property"
          children: [x: "*"]
      else:
      - x: "*"
